File Information
Library: XML
Package: XML
Header: Poco/XML/ParserEngine.h
Description
This class provides an object-oriented, stream-based, low-level interface to the XML Parser Toolkit (expat). It is strongly recommended, that you use the SAX parser classes (which are based on this class) instead of this class, since they provide a standardized, higher-level interface to the parser.
Inheritance
Direct Base Classes: Locator
All Base Classes: Locator
Member Summary
Member Functions: addEncoding, convert, getColumnNumber, getContentHandler, getDTDHandler, getDeclHandler, getEnablePartialReads, getEncoding, getEntityResolver, getErrorHandler, getExpandInternalEntities, getExternalGeneralEntities, getExternalParameterEntities, getLexicalHandler, getLineNumber, getNamespaceStrategy, getPublicId, getSystemId, handleCharacterData, handleComment, handleDefault, handleEndCdataSection, handleEndDoctypeDecl, handleEndElement, handleEndNamespaceDecl, handleEntityDecl, handleError, handleExternalEntityRef, handleExternalParsedEntityDecl, handleInternalParsedEntityDecl, handleNotationDecl, handleProcessingInstruction, handleSkippedEntity, handleStartCdataSection, handleStartDoctypeDecl, handleStartElement, handleStartNamespaceDecl, handleUnknownEncoding, handleUnparsedEntityDecl, init, locator, parse, parseByteInputStream, parseCharInputStream, parseExternal, parseExternalByteInputStream, parseExternalCharInputStream, popContext, pushContext, readBytes, readChars, resetContext, setBillionLaughsAttackProtectionActivationThreshold, setBillionLaughsAttackProtectionMaximumAmplification, setContentHandler, setDTDHandler, setDeclHandler, setEnablePartialReads, setEncoding, setEntityResolver, setErrorHandler, setExpandInternalEntities, setExternalGeneralEntities, setExternalParameterEntities, setLexicalHandler, setNamespaceStrategy
Inherited Functions: getColumnNumber, getLineNumber, getPublicId, getSystemId
Constructors
ParserEngine
ParserEngine();
Creates the parser engine.
ParserEngine
ParserEngine(
const XMLString & encoding
);
Creates the parser engine and passes the encoding to the underlying parser.
Destructor
~ParserEngine
~ParserEngine();
Destroys the parser.
Member Functions
addEncoding
void addEncoding(
const XMLString & name,
Poco::TextEncoding * pEncoding
);
Adds an encoding to the parser.
getColumnNumber
int getColumnNumber() const;
Return the column number where the current document event ends.
See also: Poco::XML::Locator::getColumnNumber()
getContentHandler
ContentHandler * getContentHandler() const;
Return the current content handler.
getDTDHandler
DTDHandler * getDTDHandler() const;
Return the current DTD handler.
getDeclHandler
DeclHandler * getDeclHandler() const;
Return the current DTD declarations handler.
getEnablePartialReads
bool getEnablePartialReads() const;
Returns true if partial reads are enabled (see setEnablePartialReads()), false otherwise.
getEncoding
const XMLString & getEncoding() const;
Returns the encoding used by expat.
getEntityResolver
EntityResolver * getEntityResolver() const;
Return the current entity resolver.
getErrorHandler
ErrorHandler * getErrorHandler() const;
Return the current error handler.
getExpandInternalEntities
bool getExpandInternalEntities() const;
Returns true if internal entities will be expanded automatically, which is the default.
getExternalGeneralEntities
bool getExternalGeneralEntities() const;
Returns true if external general entities will be processed; false otherwise.
getExternalParameterEntities
bool getExternalParameterEntities() const;
Returns true if external parameter entities will be processed; false otherwise.
getLexicalHandler
LexicalHandler * getLexicalHandler() const;
Return the current lexical handler.
getLineNumber
int getLineNumber() const;
Return the line number where the current document event ends.
See also: Poco::XML::Locator::getLineNumber()
getNamespaceStrategy
NamespaceStrategy * getNamespaceStrategy() const;
Returns the NamespaceStrategy currently in use.
getPublicId
XMLString getPublicId() const;
Return the public identifier for the current document event.
See also: Poco::XML::Locator::getPublicId()
getSystemId
XMLString getSystemId() const;
Return the system identifier for the current document event.
See also: Poco::XML::Locator::getSystemId()
parse
void parse(
InputSource * pInputSource
);
Parse an XML document from the given InputSource.
parse
void parse(
const char * pBuffer,
std::size_t size
);
Parses an XML document from the given buffer.
setBillionLaughsAttackProtectionActivationThreshold
void setBillionLaughsAttackProtectionActivationThreshold(
Poco::UInt64 activationThresholdBytes
);
Sets number of output bytes (including amplification from entity expansion and reading DTD files) needed to activate protection against Billion Laughs Attacks.
Defaults to 8 MiB.
Requires an underlying Expat version >= 2.4.0.
setBillionLaughsAttackProtectionMaximumAmplification
void setBillionLaughsAttackProtectionMaximumAmplification(
float maximumAmplificationFactor
);
Sets the maximum tolerated amplification factor for protection against Billion Laughs Attacks.
The amplification factor is calculated as:
amplification := (direct + indirect) / direct
while parsing, whereas:
- direct is the number of bytes read from the primary document in parsing and
- indirect is the number of bytes added by expanding entities and reading of external DTD files, combined.
maximumAmplificationFactor must be non-NaN and greater than or equal to 1.0.
Requires an underlying Expat version >= 2.4.0.
setContentHandler
void setContentHandler(
ContentHandler * pContentHandler
);
Allow an application to register a content event handler.
setDTDHandler
void setDTDHandler(
DTDHandler * pDTDHandler
);
Allow an application to register a DTD event handler.
setDeclHandler
void setDeclHandler(
DeclHandler * pDeclHandler
);
Allow an application to register a DTD declarations event handler.
setEnablePartialReads
void setEnablePartialReads(
bool flag = true
);
Enable or disable partial reads from the input source.
This is useful for parsing XML from a socket stream for a protocol like XMPP, where basically single elements are read one at a time from the input source's stream, and following elements depend upon responses sent back to the peer.
Normally, the parser always reads blocks of PARSE_BUFFER_SIZE at a time, and blocks until a complete block has been read (or the end of the stream has been reached). This allows for efficient parsing of "complete" XML documents, but fails in a case such as XMPP, where only XML fragments are sent at a time.
setEncoding
void setEncoding(
const XMLString & encoding
);
Sets the encoding used by expat. The encoding must be set before parsing begins, otherwise it will be ignored.
setEntityResolver
void setEntityResolver(
EntityResolver * pResolver
);
Allow an application to register an entity resolver.
setErrorHandler
void setErrorHandler(
ErrorHandler * pErrorHandler
);
Allow an application to register an error event handler.
setExpandInternalEntities
void setExpandInternalEntities(
bool flag = true
);
Enables/disables expansion of internal entities (enabled by default). If entity expansion is disabled, internal entities are reported via the default handler. Must be set before parsing begins, otherwise it will be ignored.
setExternalGeneralEntities
void setExternalGeneralEntities(
bool flag = true
);
Enable or disable processing of external general entities.
setExternalParameterEntities
void setExternalParameterEntities(
bool flag = true
);
Enable or disable processing of external parameter entities.
setLexicalHandler
void setLexicalHandler(
LexicalHandler * pLexicalHandler
);
Allow an application to register a lexical event handler.
setNamespaceStrategy
void setNamespaceStrategy(
NamespaceStrategy * pStrategy
);
Sets the NamespaceStrategy used by the parser. The parser takes ownership of the strategy object and deletes it when it's no longer needed. The default is NoNamespacesStrategy.
convert
static int convert(
void * data,
const char * s
);
handleCharacterData
static void handleCharacterData(
void * userData,
const XML_Char * s,
int len
);
handleComment
static void handleComment(
void * userData,
const XML_Char * data
);
handleDefault
static void handleDefault(
void * userData,
const XML_Char * s,
int len
);
handleEndCdataSection
static void handleEndCdataSection(
void * userData
);
handleEndDoctypeDecl
static void handleEndDoctypeDecl(
void * userData
);
handleEndElement
static void handleEndElement(
void * userData,
const XML_Char * name
);
handleEndNamespaceDecl
static void handleEndNamespaceDecl(
void * userData,
const XML_Char * prefix
);
handleEntityDecl
static void handleEntityDecl(
void * userData,
const XML_Char * entityName,
int isParamEntity,
const XML_Char * value,
int valueLength,
const XML_Char * base,
const XML_Char * systemId,
const XML_Char * publicId,
const XML_Char * notationName
);
handleError
void handleError(
int errorNo
);
Throws an XMLException with a message corresponding to the given Expat error code.
handleExternalEntityRef
static int handleExternalEntityRef(
XML_Parser parser,
const XML_Char * openEntityNames,
const XML_Char * base,
const XML_Char * systemId,
const XML_Char * publicId
);
handleExternalParsedEntityDecl
static void handleExternalParsedEntityDecl(
void * userData,
const XML_Char * entityName,
const XML_Char * base,
const XML_Char * systemId,
const XML_Char * publicId
);
handleInternalParsedEntityDecl
static void handleInternalParsedEntityDecl(
void * userData,
const XML_Char * entityName,
const XML_Char * replacementText,
int replacementTextLength
);
handleNotationDecl
static void handleNotationDecl(
void * userData,
const XML_Char * notationName,
const XML_Char * base,
const XML_Char * systemId,
const XML_Char * publicId
);
handleProcessingInstruction
static void handleProcessingInstruction(
void * userData,
const XML_Char * target,
const XML_Char * data
);
handleSkippedEntity
static void handleSkippedEntity(
void * userData,
const XML_Char * entityName,
int isParameterEntity
);
handleStartCdataSection
static void handleStartCdataSection(
void * userData
);
handleStartDoctypeDecl
static void handleStartDoctypeDecl(
void * userData,
const XML_Char * doctypeName,
const XML_Char * systemId,
const XML_Char * publicId,
int hasInternalSubset
);
handleStartElement
static void handleStartElement(
void * userData,
const XML_Char * name,
const XML_Char * * atts
);
handleStartNamespaceDecl
static void handleStartNamespaceDecl(
void * userData,
const XML_Char * prefix,
const XML_Char * uri
);
handleUnknownEncoding
static int handleUnknownEncoding(
void * encodingHandlerData,
const XML_Char * name,
XML_Encoding * info
);
handleUnparsedEntityDecl
static void handleUnparsedEntityDecl(
void * userData,
const XML_Char * entityName,
const XML_Char * base,
const XML_Char * systemId,
const XML_Char * publicId,
const XML_Char * notationName
);
init
void init();
initializes expat
locator
const Locator & locator() const;
Returns a locator denoting the current parse location.
parseByteInputStream
void parseByteInputStream(
XMLByteInputStream & istr
);
Parses an entity from the given stream.
parseCharInputStream
void parseCharInputStream(
XMLCharInputStream & istr
);
Parses an entity from the given stream.
parseExternal
void parseExternal(
XML_Parser extParser,
InputSource * pInputSource
);
Parse an XML document from the given InputSource.
parseExternalByteInputStream
void parseExternalByteInputStream(
XML_Parser extParser,
XMLByteInputStream & istr
);
Parses an external entity from the given stream, with a separate parser.
parseExternalCharInputStream
void parseExternalCharInputStream(
XML_Parser extParser,
XMLCharInputStream & istr
);
Parses an external entity from the given stream, with a separate parser.
popContext
void popContext();
Pops the top-most entry from the context stack.
pushContext
void pushContext(
XML_Parser parser,
InputSource * pInputSource
);
Pushes a new entry to the context stack.
readBytes
std::streamsize readBytes(
XMLByteInputStream & istr,
char * pBuffer,
std::streamsize bufferSize
);
Reads at most bufferSize bytes from the given stream into the given buffer.
readChars
std::streamsize readChars(
XMLCharInputStream & istr,
XMLChar * pBuffer,
std::streamsize bufferSize
);
Reads at most bufferSize chars from the given stream into the given buffer.
resetContext
void resetContext();
Resets and clears the context stack.